Cary Audio Design CPA 1 Owner'S Manual Download Page 13

SERVICE AND CARE 

 

 

12

CARE AND CLEANING 

 

The cabinet housing and front panel of the component may be cleaned with a soft cloth and 
Windex or a window cleaner. The frequency of cleaning will be governed by how many hours the 

unit is operated and by operating environment cleanliness.

 

 

 

FACTORY SERVICE 

 

Careful consideration has been given to the design of this component to keep maintenance 

problems to a minimum. Any problems or requests for service should be referred to our 

Customer Service Department at 919-355-0010. DO NOT return the unit to the factory without a 

return authorization number (RA) from the Customer Service Department.  

 
Cary Audio Design will assume no responsibility if the shipping company refuses to pay for 

damage due to your improper packing or lack of insurance should the unit be lost or damaged in 

shipment. Please retain and always use the original shipping carton for shipping the player.

 

 

 

NON-WARRANTY REPAIRS 

 

Cary Audio Design will provide repair service for its products charging on a time and expense 

basis. At this time, the standard non warranty service bench fee is $125 with all parts used for 

repair charged extra. This may change and is not a quote for service. Please call us at 919-355-

0010 for more information about out of warranty service and repair fees. 
 

 

CAUTION - 

Never remove or insert the back panel AC plug when the unit is on or the 

ac cord is plugged into the wall. 

 

Summary of Contents for CPA 1
















Reviews: