76-01412C 122716
SPECIFICATIONS
VX412T, VX412B
Configuration:
Four 12” speakers
VX412T
slant top
VX412B
square (bottom)
Frequency Response:
68 Hz – 5.5 kHz (with backs closed)
Power Handling:
Carvin GT12 speaker
400W mono, 200W/200W stereo (std.)
Celestion™ Vintage30™ 240W mono, 120W/120W stereo (opt.)
Impedance:
16 Ohms mono, 8 Ohms stereo
Enclosure:
Premium Russian Baltic Birch,
2 Removable back panels
Finish:
Black Vinyl standard,
optional colors and textures
Transport:
2 Recessed Steel Handles,
caster sockets fit CTS4
Grill:
Acoustically Transparent Grillcloth
removable for speaker access
Connections:
Two 1/4” connectors
mono/stereo switch
Dimensions (H x W x D): 30.75” x 30.25” x 14”(S-top=11”)
781 x 769 x 356mm (S-top=280mm)
Net Wt:
VX412T
89 lb (40.5 kg)
VX412B
92 lb (41.8 kg)
Accessories
CVVX412T or CVVX412B covers
CTS4 caster set (4)
LIMITED WARRANTY
Your Carvin loudspeaker is guaranteed against failure due to manufacturing defects for 5 YEARS unless otherwise stated. Carvin will service and supply all parts at no charge to the customer
providing the unit is under warranty. Shipping costs are the responsibility of the customer. CARVIN DOES NOT PAY FOR PARTS OR SERVICING OTHER THAN OUR OWN. A COPY OF THE
ORIGINAL INVOICE IS REQUIRED TO VERIFY YOUR WARRANTY. Carvin assumes no responsibility for equipment damaged by this unit. This warranty does not cover, and no liability is
assumed, for damage due to: natural disasters, accidents, abuse, loss of parts, lack of reasonable care, incorrect use, or failure to follow instructions. This warranty is in lieu of all other warranties,
expressed or implied. No representative or person is authorized to represent or assume for Carvin any liability in connection with the sale or servicing of Carvin products. CARVIN SHALL NOT BE
LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.
MAINTAINING YOUR EQUIPMENT
The panel of your unit can be wiped with a dry or slightly damp cloth in order to remove dust and bring back the new look. Avoid spilling liquids or allowing any other foreign matter inside the unit. As
with all pro gear, avoid prolonged use in caustic environments (salt air). When used in such an environment, be sure the equipment is adequately protected.
SERVICE:
In the USA: email: [email protected], or visit our website: www.carvinaudio.com and under “SUPPORT” click on “REPAIR INFORMATION”
Outside the USA: contact your dealer, or go to http://www.carvinaudio.com click on “DEALERS” for your nearest service center.
Include a written description of the problem with serial number and date of purchase.
VX212, VX212S
Configuration:
Two 12” speakers
VX212
horizontal or vertical orientation
VX212S
vertical, slant top
Frequency Response:
72 Hz – 5.5 kHz (with backs closed)
Power Handling:
Carvin GT12 speaker
200W mono, 100W/100W stereo (std.)
Celestion™ Vintage30™ 120W mono, 60W/60W stereo (opt.)
Impedance:
16 Ohms mono, 8 Ohms stereo
Enclosure:
Premium Russian Baltic Birch,
2 Removable back panels
Finish:
Black Vinyl standard,
optional colors and textures
Transport:
2 Recessed Steel Handles
Grill:
Acoustically Transparent Grillcloth
removable for speaker access
Connections:
Two 1/4” connectors
mono/stereo switch
Dimensions (H x W x D): 30.75” x 17.5” x 12.25” (S-top=9.25”)
781 x 445 x 321mm (S-top=235mm)
Net Wt:
VX212
54 lb (24.6 kg)
VX212S
51.8 lb (23.6 kg)
Accessories
CVVX212 cover for VX212
CVVX212S for VX212S
VX112
Configuration:
One 12” speaker
tilt-back or flat side orientation
Frequency Response:
76 Hz – 5.5 kHz (with back closed)
Power Handling:
Carvin GT12 speaker
100W (standard)
Celestion™ Vintage30™ 60W (optional)
Impedance:
16 Ohms
Enclosure:
Premium Russian Baltic Birch,
Removable back panel
Removable top amp stop for tilt-back
Finish:
Black Vinyl standard,
optional colors and textures
Transport:
2 Recessed Steel Handles
Grill:
Acoustically Transparent Grillcloth
removable for speaker access
rotates 90 degrees for tilt or flat
Connections:
Two 1/4” connectors, mono
Dimensions (H x W x D): 18” x 17.5” x 12.25”
458 x 445 x 321mm
Net Wt:
32.2 lb (14.6 kg)
Accessories
CVVX112 cover
REAR CONNECTION PLATE
Remove the rubber plug to access
the Mono/Stereo switch
Replace the plug when finished
Note: You will need to change the
impedance switch on tube amps.
(no switch on VX112)
REMOVABLE BACK PANELS
Speaker response can be changed by
removing the rear panels for the option of
sealed or ported/open-back operation.
412 and 212 models feature two openings
for more variation.
To remove panels, unscrew the six screws.
Store the screws in the threaded holes.
(no switch on VX112)
