A
B
C
D
E
CONNECT TO THE
INTERNAL WIRE
CONNECTOR ON
YOUR CARVIN MIXER
LOOSEN AND REMOVE
THESE TWO SCREWS
SLIDE THIS TAB INTO
THE CONNECTOR
ON CIRCUIT BOARD
SECURE CIRCUIT BOARD WITH LONG SCREWS FROM KIT
MOUNT THE UNIT(S) AND BRACKET TO YOUR CARVIN MIXER WITH SUPPLIED SCREWS
UX600-KIT INSTALLATION PROCEDURE: FOLLOW STEPS (A) THROUGH (E).
Allows installation of up to 2 UX600R receivers per kit in your Carvin mixer.
Large consoles can accept 2 kits to mount 4 receivers.
(Kit not used for the S600 Stagemate)
LIMITED WARRANTY
90 days on all wireless electronic components. Does not cover cables, connectors, or broken parts caused by normal wear and tear or by dropping. Shipping costs are the respon-
sibility of the customer. CARVIN CORP. DOES NOT PAY FOR PARTS OR SERVICING OTHER THAN OUR OWN. A COPY OF THE ORIGINAL INVOICE IS REQUIRED TO VERIFY YOUR
WARRANTY. Carvin Corp. assumes no responsibility for horn drivers or speakers damaged by this unit. This warranty does not cover, and no liability is assumed, for damage due
to: natural disasters, accidents, abuse, loss of parts, lack of reasonable care, incorrect use, or failure to follow instructions. This warranty is in lieu of all other warranties, expressed
or implied. No representative or person is authorized to represent or assume for Carvin Corp. any liability in connection with the sale or servicing of Carvin Audio products. CARVIN
CORP. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.
RETURNING AN ITEM
Before you return an item, please visit www.carvinaudio.com and review the TROUBLE SHOOTING guide to verify that you have a defective unit. Thoroughly check your connections
and all settings. Sometimes it’s as simple as a mismatched frequency or an improper connection.
If you wish to return an item, visit www.carvinaudio.com and follow the RETURN PROCEDURE and shipping instructions. Start by completing the RMA RETURN FORM. Describe
each problem in writng and include a copy of your original invoice if under warranty.
If you do not have a copy of your original invoice, contact our accounting department at (800) 854-2235 to obtain a copy.
If your unit is out of warranty, you will be charged the current FLAT RATE for parts and labor to bring your unit up to factory specifications.
