PRO1TL
PRO5TL
XLR
AC
1. PLACE THE SUBWOOFERS:
Place the subwoofer on a firm, level surface where it will be used.
- If you are stacking two subwoofers, place them so the bottom feet sit into
the receptacles on top.
- When stacking two
TRx3010A
subs, lay them flat rather than vertically.
2. INSERT POLES:
Insert SS7 poles into the top hole on one TRx3903
and the top hole on the TRx3010A or center hole on the TRx3018A sub.
3. STACK:
One at a time, stack the TRx3903’s onto the subwoofer using
the poles as guides.
To see a video of the setup, search
“Carvin TRC system setup” on
YouTube
.
SYSTEM SETUP
PRO5TL
PRO5TL
XLR
IN-OUT
AC
XLR
AC
TRC200A
TRC210A,
TRC400A,
TRC410A:
TRC600A,
TRC610A:
4. Connect speaker cables.
Connect a TRx3903 speaker to the TRX3010A or TRx3018A
SATELLITE SPEAKER jack with a PRO5TL speaker cable.
- Single Subwoofer stack : Link the two TRx3903’s with a short
PRO1TL speaker cable.
- Two Subwoofer stack: Connect one TRx3903 to each
TRX3010A or TRx3018A with PRO5TL cables.
5. Connect AC power.
Connect the detachable AC cord to the AC IN jack and plug it
into an AC power outlet.
6. Connect your input signal.
Connect your mixer’s output to the XLR INPUT on the
TRx3010A or TRx3018A.
- TRC600A or TRC610A: link the first XLR OUTPUT to the
second XLR INPUT.
7. Power On.
Turn on the Power switch.
The “Preset” screen on the Digital Display should read:
“Trx3903 External”
-Otherwise, select it from the preset screen using the
Up/Down
(SET) buttons.
SYSTEM SETUP IS COMPLETE!
SS7 POLE
TRx3903
SS7 POLE
TRx3903
TRx3018A
FOOT
(RECEPTACLE)
