STARWHITE
9413-2950
2
POWER OUTLET
(NOT INCLUDED)
M10067A
STARWHITE
Winterizing
Spring pool opening
To prevent damage to your STARWHITE, you must remove most of the assembly parts for winter.
Only the main body (1), the wall plate (2) and the two wall gaskets (6) can remain.
See image of step 2 for reference.
Apply silicone grease to all your STARWHITE o-rings before reassembling.
INSTALLATION
GUIDE
LOCKING
RING
3
5
4
7
3
4
POOL W
ALL
(int.)
9
4
3
5
3
6
7
DETAIL
Assemble the remaining parts (5,4,7,3). Be careful to align the
main body’s key (1) onto the light’s (5) keyway. See detail
Screw the compression nut (3)
DO NOT TIGHTEN. Position the
Screw the compression nut (3)
until you feel a slight resistance.
Complete by adding a1/4 turn.
DO NOT OVER TIGHTEN. The water
tightness is not determined by the
compression nut.
Choose your union (9) and screw it onto the
main body (1) with the locking ring. Connect
or glue, your inlet hose.
Raise the water level to the
appropriate level for your pool.
Install your AC adapter preferably sheltered from the elements.
Connect the light to your AC adapter. Read the following
instructions before connecting to power outlet.
ADAPTER
ON/OFF
SWITCH
Usage
Plug the StarWhite wire into the switch harness, connect the harness to the AC adapter and then plug the power cord to the electrical outlet.
To light up your StarWhite simply press the rocker switch on the cord.
