CONGRATULATIONS
on your purchase of Carvin’s RX1200L or RX1200R mixer.
The RX1200L includes built-in high power amplifiers for direct hook-up to your speakers, while
the RX1200R is a non-powered model designed for use with your own power amps. Please read
this manual carefully to take advantage of the many features of your mixer.
SUPERB SOUND
is derived from the extremely low distortion, “high headroom” design.
State-of-the art, low noise, balanced XLR preamps from our Concert Series mixers provide a
common mode rejection better than 78 dB, which means that any noise that may come over
your cables is virtually eliminated. Even the balanced XLR output connectors guard your system
from cable noise for professional recordings or external power amp connections. Distortion is
nearly non-existent with THD below .1%, which guarantees the purity of your sound. Hear the
difference.
LIGHT WEIGHT and EASY TO USE
Controls are logically laid out, making the RX Series
simple to use reducing errors during setup and performance. Its compact size and weight of 18
lbs. makes it the lightest, most powerful mixer in it’s class.
4 HIGH CURRENT CLASS-D AMPLIFIERS produce total of 1600 watts RMS. Class-D amps not
only run cooler, but their power capabilities are outstanding. 800 watts RMS (400w/400) for your
main L and R speakers, plus 800 watts RMS (400w/400) to power your stage monitors - this is
the kind of output power that maintains the purity and integrity of your sound. Speaker outputs
accept either standard 1/4” or Speakon™ connectors for secure connections with maximum
power transfer to your speakers. Clip LEDs give you a visual indicator for each amp.
2 INDEPENDENT 24-Bit STEREO DSP EFFECTS
allow you to independently assign
each channel to your choice of simultaneous effects. You can dedicate chorus/reverb to the
acoustic guitar channel and reverb to the vocals, etc. Both effects are assignable to your stage
monitors so you can hear yourself with full effects. The effects processors feature 256 effects
each, including reverbs, choruses, flanging and echoes, with parameters fully adjustable for;
damping, decay, depth, speed, regeneration and time.
ACTIVE 3 BAND CHANNEL EQ
provides easy adjustment for the tone you want. The 80
Hz LO frequency control deliver solid non-flabby bass. A simple adjustment with the MID control
gives you the best sound for vocals or guitar by affecting the very important 750Hz frequency
range. The 11.5k Hz HI treble control adds sparkle to your top-end without adding harshness.
Both the LO and HI are “shelving”, which means they are effective from 20Hz up to 20kHz.
FOUR 7 BAND EQUALIZERS
provide precise adjustments to fine tune your overall sound
and to help control feedback. Unlike one stereo graphic equalizer, four independent 7 bands give
you total control over each power amp.
BUILT-IN AMP LIMITERS
The purpose of a limiter is to hold down peaks so the amp
won’t distort even with extra hot input signals (this protects your expensive speakers). Limiters
can increase your amp’s average output by 3 db or more, while keeping your sound clean and
uncolored.
GO WIRELESS
The RX1200L and RX1200R feature a removable panel to directly mount
up to two Carvin UX600R wireless receivers with the UX600KIT. Signals are routed directly into
channels 7 and 8. Always have your wireless ready to go.
76-12741E 010617
Model RX1200l, RX1200R SpecificationS:
Frequency Response:
Mic or Line Inputs: 20Hz-20kHz ±1dB
Total Harmonic Distortion: Less than .1% at nominal levels
Equivalent Input Noise:
150 ohm source: -117dBu
Output Noise:
-100dBu Master Line Out
(All Levels Minimum)
Output Headroom: +10dB
Maximum Gain:
Mic in to Master Line Out: 60dB
Crosstalk:
Adjacent ch’s: -60db at 1KHz
Common Mode Rejection: -78db at 1KHz
Phantom Power:
48 volt @ XLR Mic channels
Channel EQ 3-band active: LOW: 80Hz ±12dB
MID: 750Hz ±12dB
HI: 11.5KHz ±12dB
Power Output:
RX1200L: 1600w @ 4 ohms (8 ohm: 250w x4, 4 ohm: 400w x4)
Size and Weight:
RX1200L (with sides): 10.25”H x 19”W x 9.5”D, 18 lbs.
RX1200L (no sides): 8.75”H x 19”W x 8”D, 14.5 lbs.
RX1200R: 8.75”H x 19”W x 8”D, 10.5 lbs.
Power Requirements:
RX1200L: USA model: 100-140VAC, ~50-60Hz
RX1200L-E: export model: 200-250VAC, ~50-60Hz
RX1200R:
90-250VAC, ~50-60Hz
Options:
UX600 wireless receiver
(requires UX600KIT for mounting and UX600M mic or UX600B beltpack)
FS22 footswitch for Effects mute
ENGINEERED TO LAST
Every RX Series mixer is housed in a rugged
steel rackmountable chassis. Continuous full power is assured from high-grade
6063-T5-aluminum heat sinks cooled by a variable speed fan. Sealed controls and
switches guard against the outside elements while heavy-duty connectors provide
a positive connection to your cables. Hidden deep in the heart of these mixers is
the “SMT” Surface Mount Technology that utilizes surface mounted components to
prevent parts from shaking or vibrating loose. Precision 1% tolerances guarantee
that your settings will be accurate every time. Fire retardant FR-4 military spec circuit
boards feature double-sided copper construction to guard against noise and radio
frequencies (RF). The RX Series is made in the USA.
ReceiVinG inSpection—read before getting started
INSPECT YOUR AMP FOR DAMAGE which may have occurred during shipping. If
damage is found, please notify the shipping company and CARVIN immediately.
SAVE THE CARTON & ALL PACKING MATERIALS. In the event you have to re-ship
your unit, always use the original carton and packing material. This will provide the best
possible protection during shipment. CARVIN and the shipping company are not liable
for any damage caused by improper packing.
SAVE YOUR INVOICE. It will be required for warranty service if needed in the future.
SHIPMENT SHORTAGE. If you find items missing, they may have been shipped sepa-
rately. Please allow several days for the rest of your order to arrive before inquiring.
RECORD THE SERIAL NUMBER on the enclosed warranty card or below on this
manual for your records. Keep your portion of the card and return the portion with
your name and comments to us.
for your records, you may wish to record the following information.
Serial No._____________________ Invoice Date_______________
RX1200L
RX1200L
with
end caps
removed
for rack
mounting
-or-
RX1200R
16262 WEST BERNARDO DR. SAN DIEGO, CA 92127
800-854-2235 CARVINAUDIO.COM
USER MANUAL
RX1200L, RX1200R MIXERS
