background image

CARVIN

®

 PLATINUM SERIES OVAL POOL | USER MANUAL

25

Le Groupe VIF Inc.

4000, boulevard Casavant Ouest, Saint-Hyacinthe

Québec, Canada, J2S 9E3

www.carvinpool.com

CARVIN

®

 is a registred trademarks of

Le Groupe VIF Inc. in Canada and United States of America.

CONSUMER INFORMATION

Authorized CARVIN

®

 retailer or distributor personnel are trained professionals.

They should be able to answer any question you may have. If you encounter a

problem that your retailer or distributor does not solve to your satisfaction, please 

discuss it with the retailer’s or distributor’s management. The Service Manager,

General Manager, or Owner can help. Almost all problems are solved in this way.

If you are dissatis

fi

 ed with the decision made by the retailer’s or distributor’s

management, contact the CARVIN

®

 technical support.

When you write or call, please provide the following information:

  • Product model, serial number and date code;

  • Name of retailer or distributor who sold the Product to you;

  • The original proof of purchase showing the date of purchase;

  • Your name, address and telephone number;

  • A detailed description of the problem; and

  • If sending an email, any relevant photos of the Product and its surroundings.

WARRANTY

Le Groupe VIF Inc. (“VIF”), owner and manufacturer of the CARVIN

®

 Pool Equipment 

brand, gives the following written Warranty on each new Product manufactured by 

or on behalf of VIF and distributed for sale in America.

VIF guarantees that each new Product will be free from any defects, in material 

or workmanship, for the Warranty period set below, under normal use and main-

tenance. If any defects should be found in a Product within the period set below 

and when VIF acknowledges that such defects are attributable to faulty material or 

workmanship at the time of manufacturing, at its discretion VIF will replace or repair 

with a new part or the CARVIN

®

 equivalent, at no cost to the consumer for parts and 

labour.

The Warranty Period coverage starts from the original date of sale or when the unit 

Product

Model

Non-Commercial

Warranty Period

Warranty

Coverage

975217####
975255####

30 Years

First 5 Years

100%

Last 25 Years

50%

REPLACEMENT PARTS AVAILABILITY

Replacement parts are available through your CARVIN

®

 retailer or distributor.

REPLACEMENT PARTS WARRANTY

New CARVIN

®

 replacement parts sold to a consumer or installed by an authorized 

CARVIN

®

 retailer which are not covered by this Warranty are guaranteed for a period of 

3 months, however, this Replacement Parts Warranty does not apply to any replacement 

parts modi

fi

 ed, used with, or installed on a Product for which the replacement parts 

were not intended.

ENTIRE WRITTEN WARRANTY

This Warranty is the only and the entire written Warranty given by VIF for its Product. No 

retailer or his agent or employee is authorized to extend or enlarge on these warranties 

on behalf of VIF by any written or verbal statement or advertisement.

TO OBTAIN WARRANTY SERVICE

You must 

fi

 rst contact your authorized CARVIN

®

 retailer or distributor. Please refer to 

section Customer Information.

Any defect must be reported to an authorized CARVIN

®

 retailer or distributor within 72 

hours to avoid potential breakage to other equipment, otherwise the warranty will not 

be honored.

TECHNICAL SUPPORT INFORMATION

After following the troubleshooting section of this manual and after contacting your 

dealer or distributor, if you have any problems with your Product, contact CARVIN

®

Technical Support.

AMERICA

Email

: [email protected]

Phone

1 450 250-4500 option 2

Fax

1 450 250-4501

Toll Free

:  1 866 979-4501

Mail

: CARVIN

®

 POOL EQUIPMENT

 Technical 

Support

 

4000 boul. Casavant Ouest,

 

Saint-Hyacinthe, Québec, Canada, J2S 9E3

DISCLAIMERS

This Product is not for sale or for resale where prohibited by law or regulations.

The provisions contained in these written warranties are not intended to limit, modify, 

take away from, disclaim or exclude any warranties set forth in or the operation of The 

Consumer Products Warranties Act, 1977 (Saskatchewan), The Consumer Product

Warranty and Liability Act (New Brunswick), The Consumer Protection Act (Quebec), or 

any other similar provincial or federal legislation.
VIF shall not be liable for any statement made or published, written or oral, that is mis-

leading or inconsistent with the facts published in the documentation or speci

fi

 cations 

provided by VIF.

The actual Product item number may vary from the Product model number which may include a su

  x

for color, packing options or else.

This Warranty covers:
• Any Product purchased from a CARVIN

®

 retailer or distributor authorized to sell

that product in America.
• Any Product on which required maintenance services have been performed

as prescribed in this manual.
This Warranty does not cover:
• Any repairs required as a result of collision, striking any object, frost, acts of God, 

careless use, misuse, improper installation, improper ground preparation, improper 

winterization, or lack of maintenance described in this manual;
• Any repairs required as a result of the failure, breakage, careless use, misuse, 

improper installation, or lack of maintenance of another pool equipment or accesso-

ries, such as, but not limited to, the liner, ladder, skimmer, water return, water return 

light, or winter cover;
• Any repairs required due to rust caused by improper installation, lack of mainte-

nance, or leakage, of the water return, water return light, or skimmer;
• Any Product modi

fi

 ed, altered, disassembled, or remodelled;

• Shipping related costs to and from the manufacturer;
• Installation and removal related costs; and
• Normal maintenance services or water chemistry analysis services described in 

this

 

manual.

This warranty is non-transferable and applies only to the 

fi

 rst retail buyer, and only 

during the period when the 

fi

 rst retail buyer occupies the place where the product 

was originally installed
This warranty is non-transferable and applies only to the 

fi

 rst retail purchaser, and 

only during the period when the 

fi

 rst retail buyer occupies the place where the

product was originally installed.

Summary of Contents for OVAL PLATINUM Series


























Reviews: