CARVIN HT150 Operating Manual Download Page 2

CARVIN ENGINEERING DATA

OPERATING MANUAL

The HT150 professional amp is designed utilizing Carvin’s 33

years of experience in power amp technology. It meets and
exceeds every standard for professional amplification.   The thick
brushed anodized aluminum face plate, large recessed knobs and
heavy-duty steel chassis reflect the manufacturing quality within.
The HT150 “High Energy Transfer” amp carrys the CE approval
for world-wide use.    

PURE—TRANSPARENT SOUND

Carvin considers the sound of an amp equally important as its reliabil-

ity.  To insure pure, uncolored sound, we designed one of the fastest
responding power amps on the market today.  High slew rates deliver
superb transient response.  High frequencies are transparent and open—
even at extreme levels.  Linear feedback circuits reduce distortion to near
the theoretical zero limit, preventing any type of harshness which would
lead to ear fatigue.  The HT150 amp delivers flat, transparent, unaltered
sound—especially important to the studio user.  These amps are designed
to deliver non-stop, continuous power and are completely protected from
heat and short circuits.  

ULTRA RUGGED FOR TOURING

Every chassis is made from heavy-duty 16 gauge aluminumthat is

light-weight and prevents rust.  All internal cabling is neatly tied and
harnessed.  Neutrik™ XLR connectors, heavy-duty power switches,
recessed knobs &  machined aluminum front panels all give the HT
amps a “tank-like”  ability to handle rough, touring transport. 

TOTALLY MODULAR

With the HT150, Carvin brings you totally modular construction.  If

you ever need an I/O (input/output) connector card because a connector
wore-out, just unplug it and re-install the replacement card in minutes.
You don’t have to de-solder anything.  This applies to every aspect of
the HT150 amp including the power supply, power cards, heat sinks
and fans.  Everything is connected by heavy-duty connectors for easy
replacement—even the Toroid transformer is a total plug-in.

LOSE THE WEIGHT...NOT THE PERFORMANCE

For some companies weight reduction means cost reduction.  Carvin

however, uses expensive TOROID transformers to reduce weight.
Toroids deliver extra amounts of “on demand” current for continuous
operation.  This gives the power supply a solid foundation, yielding more
headroom.  Not only do toroids deliver high current, but they are known
for reducing stray magnetic fields eliminating hum & noise.  This is espe-
cially important for the recording industry.

HT150 POWER AMP SPECIFICATIONS:

Output Power
(BRIDGE MONO)
8

, 1kHz, < 1% THD

150 Watts

Minimum Impedance (Bridged)

4 ohms

(Stereo, both channels driven)
8

, 1kHz, < 0.5% THD

60/60 Watts

4

, 1kHz, < 0.5% THD

75/75 Watts

Minimum Impedance 

4 ohms per channel

THD
20-20kHz

< 0.1%

(8

typical)

< 0.05%

Frequency Response

±0.5 dB, 20 Hz to 20 kHz

Input Impedance

> 20k

Balanced or Unbalanced

Damping Factor

>400

Sensitivity (@ 4

)

1.0 Vrms

Output Noise

-102 dBm

Power Consumption

120V—200 VA
230V—200 VA

Dimensions

1 3/4” High x 19” Wide x 10” Deep

Weight (Net)

9lbs.

76-20300   497

12340 World Trade Drive, San Diego, CA  92128

(619) 487-1600   (800) 854-2235

www.carvin.com

For your records, you may wish to record the following information.

Serial No._____________________  Invoice Date_______________

RECEIVING INSPECTION—read before getting started

INSPECT YOUR UNIT FOR ANY DAMAGE which may have occurred during shipping.

If any damage is found, please notify the shipping company and CARVIN immediately. 

SAVE THE CARTON & ALL PACKING MATERIALS.  In the event you have to re-ship your unit,

always use the original carton and packing material. This will provide the best possible protec-
tion during shipment.  CARVIN and the shipping company are not liable for any damage caused
by improper packing.  

SAVE YOUR INVOICE.  It will be required for warranty service if needed in the future. 

SHIPMENT SHORTAGE.  If you find items missing, they may have been shipped separately.

Please allow several days for the rest of your order to arrive before inquiring.

RECORD THE SERIAL NUMBER on the enclosed warranty card or below on this manual

for your records.  Keep your portion of the card and return the portion with your name and
comments to us.

HT150 POWER AMP

FRONT PANELS & CONNECTING UP

The HT150 features front panel signal, peak and protect LEDs which let

you monitor the status of the amp easily.   Also, both channels use preci-
sion 41 detent level controls allowing you to see your settings at a glance.
The EQ expand switch offers “loudness compinsation” by adding additional
bass and treble to improve your sound, especially at lower levels.  Balanced
1/4 phone &  XLR input jacks are used  to eliminate hum & noise.  Speaker
outputs  feature 1/4” jacks & heavy-duty binding posts that accept up to
50 amp #7 speaker wires.  A bridge mode switch allows the HT150 to deliver
its full power into one speaker. 

Summary of Contents for HT150

Page 1: ...Resistor 1 4W 5 2 2K 50 22035 R207 Resistor 1 4W 5 2 7K 50 27035 R208 Resistor 1 4W 5 22K 50 20045 R209 Resistor 1 4W 5 10K 50 12045 R210 Resistor 1 4W 5 910Ω 50 91025 R211 Resistor 1 4W 5 1K 50 10035 R212 Resistor 1 4W 5 1 5K 50 15035 R213 Resistor 1 4W 5 24K 50 24045 R214 Resistor 1 4W 5 2 2K 50 22035 R215 Resistor 1 4W 5 47K 50 47045 R216 Resistor 1 4W 5 3 3K 50 33035 R217 Resistor 1 4W 5 470K ...

Page 2: ...r high current but they are known for reducing stray magnetic fields eliminating hum noise This is espe cially important for the recording industry HT150 POWER AMP SPECIFICATIONS Output Power BRIDGE MONO 8Ω 1kHz 1 THD 150 Watts Minimum Impedance Bridged 4 ohms Stereo both channels driven 8Ω 1kHz 0 5 THD 60 60 Watts 4Ω 1kHz 0 5 THD 75 75 Watts Minimum Impedance 4 ohms per channel THD 20 20kHz 0 1 8...

Page 3: ...B higher than using the 1 4 input jack with a non balanced line XLR pin configuration Pin 1 Grounded through the GROUND LIFT switch Pin 2 positive Bal signal and Pin 3 negative Bal signal 8 CHANNEL 1 4 PHONE JACK INPUT This stereo phone jack is designed to receive either balanced or unbalanced input signals Balanced signals coming into this jack should be wired with the connector s tip going to si...

Page 4: ...NING DO NOT REMOVE COVER NO USER SERVICEABLE PARTS INSIDE CAUTION TO PREVENT SHOCK DO NOT DEFEAT THE SAFETY GROUND WARNING TO PREVENT A FIRE HAZARD PROVIDE ADEQUATE VENTILATION 75 75 WATTS 4 OHMS MIN PER CH STEREO MONO 1 2 INPUT 1 MONO BRIDGE S N REMOVED BRIDGE SPEAKERS INPUT 2 BALANCED LINE MADE A US INTHE 8 OHMS MIN BRIDGE INPUT LOWER LOADS MAY RESULT IN PREMATURE DISTORTION Ch 2 Speaker Use 16 ...

Reviews: