CARVIN H400 Instruction Manual Download Page 4

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

SAFETY INSTRUCTIONS (EUROPEAN)

The conductors in the AC power cord are colored in accordance with the following code.

GREEN & YELLOW—Earth        BLUE—Neutral         BROWN—Live

U.K. MAIN PLUG WARNING:  A molded main plug that has been cut off from the cord is unsafe.  NEVER

UNDER ANY CIRCUMSTANCES SHOULD YOU INSERT A DAMAGED OR CUT MAIN PLUG INTO A POWER SOCKET.

IMPORTANT!  FOR YOUR PROTECTION, PLEASE READ THE FOLLOWING:
WATER AND MOISTURE:  Appliance should not be used near water (near a bathtub, washbowl,
kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc).  Care should be taken
so that objects do not fall and liquids are not spilled into the enclosure through openings.
POWER SOURCES:  The appliance should be connected to a power supply only of the type
described in the operating instructions or as marked on the appliance.
GROUNDING OR POLARIZATION:  Precautions should be taken so that the grounding or
polarization means of an appliance is not defeated.
POWER CORD PROTECTION:  Power supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point where they exit from the appliance.
SERVICING:  The user should not attempt to service the appliance beyond that described in the
operating instructions.  All other servicing should be referred to qualified service personnel.
FUSING:  If your unit is equipped with a fuse receptacle, replace only with the same type fuse.
Refer to replacement text on the unit for correct fuse type.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL! 

This symbol is intended to alert the user to
the presence of uninsulated “dangerous
voltage” within the product’s enclosure that
may be of sufficient magnitude to

constitute a risk of electric shock to persons.

This symbol is intended to alert the
user to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the appliance.

LIMITED WARRANTY

Your Carvin product is guaranteed against failure for 1 YEAR unless otherwise stated.  Carvin

will service and supply all parts at no charge to the customer providing the unit is under
warranty.  Shipping costs are the responsibility of the customer.  CARVIN DOES NOT PAY FOR
PARTS OR SERVICING OTHER THAN OUR OWN.   A COPY OF THE ORIGINAL INVOICE IS
REQUIRED TO VERIFY YOUR WARRANTY.  Carvin assumes no responsibility for horn drivers or
speakers damaged by this unit. This warranty does not cover, and no liability is assumed, for
damage due to: natural disasters, accidents, abuse, loss of parts, lack of reasonable care,
incorrect use, or failure to follow instructions.  This warranty is in lieu of all other warranties,
expressed or implied. No representative or person is authorized to represent or assume for
Carvin any liability in connection with the sale or servicing of Carvin products. CARVIN SHALL
NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. 

When RETURNING merchandise to the factory, you may call for a return authorization

number.  Describe in writing each problem.  If your unit is out of warranty, you will be charged
the current FLAT RATE for parts and labor to bring your unit up to factory specifications. 

MAINTAINING YOUR EQUIPMENT

Avoid spilling liquids or allowing any other foreign matter inside the unit.  The panel of

your unit can be wiped from time to time with a dry or slightly damp cloth in order to
remove dust and bring back the new look. As with all pro gear, avoid prolonged use in
caustic environments (salt air).  When used in such an environment, be sure the mixer is
adequately protected by a cover.

Summary of Contents for H400

Page 1: ... 5 0 10 5 INPUT B INPUT B LEVEL PHONES INPUT B OUT AUX IN MONO PHONES AUX IN PHONES AUX IN PHONES AUX IN PK SIG AUX IN MONO OUTPUT LEVEL PHONES OUT AUX IN MONO SIG AUX IN MONO OUT LEVEL PHONES OUT AUX IN MONO PK SIG AUX IN MONO OUTPUT LEVEL PHONES OUT AUX IN MONO PK SIG AUX IN MONO OUTPUT POWER 76 02424B 012304 Congratulations on your purchase of the CARVIN H400 Four Channel Headphone Amp Your uni...

Page 2: ... control if the LED lights 8 MONO AUX IN SWITCH Pressing the MONO AUX IN switch IN causes the AUX IN jack to receive signal from the TIP conductor only sending the same signal to Left and Right 9 MONO OUT SWITCH Pressing the MONO OUT switch IN sends the same MONO signal to both the Left and Right sides of the PHONES jack 10 POWER Push this switch to the UP position to apply power to the unit The P...

Page 3: ...e assign drums and bass to the mixer aux send going to INPUT A and assign the vocals and guitar to the mixer aux send going to INPUT B The guitarist mixer channel 8 may want to hear more guitar so connect the DIRECT OUT from mixer channel 8 to the AUX IN jack of headphone channel 1 The bassist may want to hear more kick drum mixer channel 7 so connect the DIRECT OUT from mixer channel 7 kick to th...

Page 4: ...gerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons This symbol is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance LIMITED WARRANTY Your Carvin product is guaranteed against failure for 1 YEAR unless otherwise stated C...

Reviews: