Page 11 of 12
When standing in the front of the trolley looking at the front
wheel, loosen the 17 mm nut on the right side of the front
wheel.
Depending on how the trolley is tracking, will determine which
way to turn the Allen set screws.
The Allen Set Screws should be gently turned on both the front
and back sides an equal amount.
If the Trolley is tracking to the right, (when standing behind
the trolley) turn the rear side of the Allen Set screw counter
clockwise. Turn the front of the Allen Set screw clockwise.
Turn both sides equally.
If the Trolley is tracking to the left (when standing behind the
trolley) turn the front of the Allen Set screw counter clockwise
and turn the rear side of the Allen Set screw clockwise.
Retighten 17 mm cap nut. Test and repeat if necessary.
FRONT of Allen Set Screws
Turn with Allan Wrench
