All rights reserved. No part of this work may be reproduced or copied in any form or by any means (graphic, electronic, or mechanical, including photocopying,
recording, recording taping, or information and retrieval systems) without the written permission of the copyright owner
4
2.
There are Rs232 interface and OTG from cradle.
Highlights: OTG port from device (10pin usb connector) and cradle are sharing same pins. Only 1 OTG
interface can be used.
Pin 1 – Ignition (white)
Pin 2 – GPIO (reserved) (green)
Pin 3 – CTS (red)
Pin 4 – car battery input (12-28V) (black)
Pin 5 – RTS (blue)
Pin 6 – RXD (yellow)
Pin 7 – TXD (purple)
Pin 8 – GND (grey)
Pin 9 – GND (orange)
Pin 10 – NOT connected (brown)
Pin 11 – NOT connected (pink)
Pin 12 – 5V input (white-black)
This cable can be customized when you placed
order
For sample, it will be 12 pins connector, pls see
below or pins assignment
Usb connector for
OTG or charging
