9
GENERAL MAINTENANCE INSTRUCTIONS
REVERSING THE DOOR (cont.)
9. Reinstall the door handle, door trip plate and (4) screws into the same location as they were removed.
The door pull should point up instead of down.
10. Remove the (6) bolts, (3) for the top, (3) for the bottom, located on the side of the cabinet opposite from the
door hinges and set aside.
11. With assistance, remove the (6) bolts that attach the door hinges to the cabinet. There are (3) on the top
and (3) are the bottom.
12. Rotate the door 180 degrees and mount the top and bottom hinges using the (6) bolts previously removed.
The door pull should be pointing down.
13. On the side where the hinges were previously, reinstall the (6) bolts.
14. Adjust the hinges, door handle and door catch as needed to ensure there is a good seal and door closure.