TCM4 / TCM4-BLE MultiFreq card reader
JAN 2021
Parameter
name
Description
Default values
General parameters
comusb
USB Communication Type (CDC/HID Keyboard Azerty or Qwerty.
1: HID keyboard QWERTY
2: HID keyboard AZERTY
3: CDC (serial port emulation)
4: HP mode
1: HID Keyboard Qwerty
freq
The TCM4 can scan all types of cards or be restricted to one or several
types of card technologies. The values of this parameter can be
summed (mask) to scan several types of cards. The following values
are configured in hex format.
Possible values are (minimum 4 digits entry):
0000: Lock first (card type of the first card detected by TCM4 after
power up will be applied as filter)
0001: ISO 14443 13.56Mhz (Mifare) type A
0002: ISO 14443 13.56Mhz (Mifare) type B
0004: ISO 15693 ICODE 13.56Mhz
0100: iCLASS 13.56Mhz
0400: IZLY complete format 13.56Mhz (requires a TCM4-Izly)
0800: FELICA 13.56Mhz
1000: IZLY short format 13.56MHz (requires a TCM4-Izly)
10000: IZLY long format 13.56MHz (requires a TCM4-Izly)
40000: NFC for Smartphone with CartadisID application
0010: EM (Electronic Marin) 125Khz
0020: HID Prox 125Khz
0040: HITAG 125Khz
2000: Indala 125Khz
8000: StartProx
FFFF FFFF : All card types
0000: Lock first
nobuzz
Disable/Enable buzzer.
0: Buzzer is enabled (beeps at each card detection)
1: Buzzer disabled
0: Buzzer enabled
UID reading mode parameters
niboffset
Skip niboffset digits in the IUD card. This parameter allows to reduce
the size of an UID when all the cards have the same prefix
0
niblen
When the size of IUD is greater than
the “niblen”
, it is truncated and
only the “niblen” digits from the right of the UID are kept
64
swap
Swap MSB/LSB of UID.
0: No swap
1: Swap MSB/LSB
0: Disabled
uidindec
Converts the hex UID card in decimal format.
0: Disabled
1: Converts the UID card in decimal
0: Disabled
