Cart-Tek GRX-1200-R, User Manual

Page: 4 / 24

Page 4 of 24
QUICK TIP
BASIC SET-UP

Remove all components from carton. Note any damage
with carrier.

Assemble the two large wheels. Depress blade on wheel
hub to fully seat wheel onto axle and insert into the drive
collar. The drive collar is fixed on the axle and has two
metal prongs that insert into the center of the wheel.

For “free wheel” mode depress and pull wheel out ¼ of
an inch, making sure it is engaged and attached to the
axle.

Attach rear “anti-tip” wheel.

Lift handle and secure with lower locking knob.

Extend handle fully and secure in position by lowering
the “upper bag rest”, which is already attached to the
handle.

Securely attach antenna to receiver dome on the top of
the handle.
After unpacking the caddy and while reading this manual, place
the battery on charge while you assemble the unit. Plug battery
into charger and charger into power source. The battery may be
delivered with a charge but should always be placed on charge
before using to ensure full charge of battery.