Carson SA-400-17 Installation & Operating Instructions Manual Download Page 12

Page 12 of 12     SA-400-17  Installation and Operating Instructions

 

08/06/08 

CP5012A 

LIMITED WARRANTY 

Carson Manufacturing Company, Inc. warrants this new product to be free from defects 
in material and workmanship, under normal use and service, for a period of five (5) 
years from the date of delivery to the first user-purchaser. 
 
During this warranty period the obligation of Carson Manufacturing is limited to repairing 
or replacing, as Carson Manufacturing may elect, any part or parts of such product 
which after examination by Carson Manufacturing is determined to be defective in mate-
rial and/or workmanship. 
 
This warranty does not cover labor charges for removal or re-installation of the product.  
Fuses and lamps are not covered under this warranty. 
 
This warranty does not extend to any unit that has been subjected to abuse, misuse, 
improper installation or which has not been adequately maintained, nor to units which 
have problems related to service or modification at any facility other than the manufac-
turer. 
 
THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING 
BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR 
FITNESS FOR A PARTICULAR PURPOSE.  IN NO EVENT SHALL CARSON MANU-
FACTURING COMPANY, INC. BE LIABLE FOR ANY LOSS OF PROFITS OR ANY 
INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF ANY SUCH DEFECT 
IN MATERIALS OR WORKMANSHIP.  

 
 
 

RETURN 

 

If you have any questions concerning this or any other Carson product, 
please contact our 

Technical Service Department

 at (888) 577-6877.  

Many issues can be handled over the phone.  We can also be reached via 
e-mail at 

[email protected] 

 
If a product must be returned for any reason, please contact our Technical 
Service Department to obtain a Returned Merchandise Authorization num-
ber (RMA#) before you ship the product to Carson.  Please write the RMA# 
clearly on the package near the mailing label.  Be sure to provide a return 
address, contact and phone number, along with a brief description of the 
problem.

 

Summary of Contents for SA-400-17













Reviews: