SETTING UP TRIPOD:
1. Flip open leg locks and extend legs to desired
2. Loosen locking collar on center column to fully extend leg
height. Close leg locks to lock in place (Fig. 1).
brace. Tighten collar to lock in place. To make sure tripod
is level, the bubble level should appear centered inside
red circle. Adjust leg height as needed to level tripod
(Fig.2).
Center Column
Locking Collar
Leg Brace
Bubble Level
ATTACHING CAMERA OR SPOTTING SCOPE:
Fig. 2
1. Pull back plate locking lever
to remove quick release plate
(Fig. 3).
Fig. 3
2. Insert mounting screw into thread on
optic and turn wingnut (located on
underside of quick release plate)
clockwise until tight. This will secure
optic to plate (Fig. 4).
Fig. 4
6TJOH:PVS5SJQPE
3. Reattach quick release plate to
tripod head. Press down plate and
lever will shift into place and lock
(Fig. 5).
Fig. 5
53POMZ
MPPTFO
DPVOUFSDMPDLXJTF5VSOUJMUQBOIBOEMF
SJHIUPSMFGUBTEFTJSFE3FUJHIUFOLOPC
UPMPDLJOQMBDF
ATTACHING BINOCULARS:
PLEASE NOTE:
To attach your full sized
binoculars to a tripod, you will need a
tripod binocular adapter (not included).
1. Pull back plate locking lever to remove
quick release plate (Fig. 6).
2. Insert mounting screw into thread on
adapter and turn wingnut (located on
underside of quick release plate)
clockwise until tight. This will secure
adapter to plate (Fig. 7).
3. Reattach quick release plate to
tripod head. Press down plate and
lever will shift into place and lock
(Fig. 8).
4. Attach binocular to adapter.
Fig. 6
2
Fig. 7
Fig. 8
Fig. 1