GB
// Reflex Wheel S
YOUR TRANSMITTER
Transmitter overview
TH.REV (Travel reverse function)
ON/OFF
LED
ST.REV (Steering reverse function)
ST. D/R (Restriction of steering angle)
Binding button
ST (Trim /
fine adjustment of steering)
TH (Trim /
fine adjustment of travel)
Steering wheel
TH D/R
(Restriction of speed)
INSTALLING THE TRANSMITTER BATTERIES
1. Open the battery compartment lid on the underside of the
transmitter.
2. Insert fully charged rechargeable batteries or new AA bat-
teries observing the correct polarity. Close the cover on the
battery compartment again. Ensure that the cover clicks
properly into place. Check that it is in its correct position.
EQUIPMENT FOR COMBUSTION ENGINE
Receiver Batteries and two servos are not included in the kit.
Receiver
Make sure to
connect in
correct
direction.
Receiver switch
Steering servo Channel 1
(not included)
Throttle servo Channel 2
(not included)
ATTENTION
When connecting servo leads to the receiver always ensure
that the yellow lead/wire is facing inwards (towards the
crystal).
6 - 1
1 V
CH3
CH2
CH1
Additional channel
Reflex Wheel S