background image

Important Safety Tips

 

WARNING:  Incorrect installation and improper use may lead to mechanical 

failure or personal injury. 

Considerations for installing / using this product

1. Handle with care to avoid damage. 

2. Do not expose the product to rainwater or any other form of moisture.

3. Keep away from heat sources, such as radiators  and other items that may 

emit heat 

4. Do not attempt to service or modify this unit without professional assistance.

5. Check whether the voltage is consistent with the required voltage. 

6. Do not fold or touch the screen directly with your hands, tools or any other 

abrasive/sharp objects.

7. When not in use, retract the screen to protect the optical surface.

8. Do not run the screen continuously as the motor has an anti-overheating 

function and will shut down.

9. Keep the screen horizontal at all times.

The company will not be liable for any damages or injuries caused by a faulty 

installation or operation.

  

Do not adjust the limit by yourself

Cleaning

AVOID using detergents or harsh chemicals to clean the screen. A soft cloth and 

mild soap can clean dust and dirt off the screen material. To get dirt off the 

screen, use a soft cloth with mild soap. To just wipe off, a cotton cloth will 

suffice.

Summary of Contents for Phantom










Reviews: