ATTACHING TO OPTIC:
1. Select the optic adapter ring
that best fits your binocular
eyepiece and insert it into optic
adapter.
Note: In rare instances (if the
eyecup is oversized and
rubber), the adapter will work
best without an adapter ring.
F
2. Align optic adapter over eyepiece
and press down firmly. Be careful
not to move your camera out of
alignment.
Fig. 13
3. Phone can be positioned in either
portrait or landscape mode.
ig. 14
4. Ensure that optic adapter is flush to
the eyepiece of your binocular.
Fig. 15
5. Turn on camera. If image is not
centered, repeat alignment steps.
Fig. 16
6. To maximize your image, pinch to
enlarge image. For best results,
use in video mode.
Fig. 17
Fig. 12
TO REMOVE PHONE FROM ADAPTER:
To save your alignment, make no further adjustments to the top clamp and alignment knob. Simply remove
phone using right clamp only as shown in Fig. 4.
USING ADAPTER AGAIN:
The alignment of your phone to the adapter should be saved from the initial setup so that many of the steps
can be skipped (Figs.1-2, 7-11). Only a quick fine adjustment of the alignment may be needed.
7
3
