Page 2 of 4
HA-100-10 14 Installation and Operating Instructions
01/27/10
CP5031A
GENERAL DESCRIPTION
The HA-100 Horn Amplifier is a premium unit designed for an 11 ohm 100 watt speaker. The unit
produces a simulated air-horn sound. This compact unit utilizes short circuit, high voltage, and
reverse polarity protection systems for maximum service life. An output indicator light is provided
for diagnostics.
SPECIFICATIONS
NOTICE
Due to continuous product improvements, we must reserve the right to change any specifications and information,
contained in this manual at any time without notice.
Carson Manufacturing Co., Inc. makes no warranty of any kind with regard to this manual, including, but not
limited to, the implied warranties of merchantability and fitness for a particular purpose.
Carson Manufacturing Co., Inc. shall not be liable for errors contained herein or for incidental or consequential
damages in connection with the furnishing, performance, or use of this manual.
See www.carson-mfg.com for latest information.
INSTALLATION
Proper installation of the unit is essential for years of safe, reliable operation. Please read all
instruction
before
installing the unit. Failure to follow these instructions can cause serious dam-
age to the unit or vehicle and may void warranties.
SAFETY PRECAUTIONS
For the safety of the installer, vehicle operator, passengers and the community please observe
the following safety precautions.
Failure to follow all safety precautions and instructions may
result in property damage, injury or death.
Qualifications -
The installer must have a firm knowledge of basic electricity, vehicle electrical
systems and emergency equipment.
Mounting
- Mount the unit for easy access by the vehicle operator. DO NOT mount in air bag
deployment area. Assure clearances before drilling in vehicle.
Wiring
- Use wiring capable of handling the current required. Make sure all connections are tight.
Route wiring to prevent wear, overheating and interference with air bag deployment. Install and
check all wiring before connection to vehicle battery.
Testing
- Test for proper unit operation. Test vehicle operation to assure no damage to vehicle.
Keep These Instructions
- Keep these instructions in the vehicle or other safe place for future
reference. Advise the vehicle operator of the location.
UNPACKING
Inspect contents for shipping damage. If found
alert carrier immediately
.
Contact supplier immediately if any components are missing.
Contents of box should include the following items:
Qty Item
1
Amplifier Unit (HA-100-10 14)
1
Connector, 4-P Terminal Block Plug (CP4688-04)
1
Instruction Manual (CP5031 This Manual)
Speaker Load
Single 100W 11ohm
Input Voltage
9 - 16 VDC (negative ground)
Input Current
8 AMPS (14 VDC)
Output Power
105 WATTS RMS MAX. (15 VDC)
High Voltage Protection
16 - 18 VDC will cause output to cease, resume at normal
Short Circuit Current
50 AMPS (supply circuit must be capable of supplying this for 1 second)
Operating Temp.
-15° F to +140°F
Size
3-5/8" Long, 4-1/4" Wide, 1-13/16" High
Weight
1 LB.
Sound Hazard
- Sound level from horn speaker (>120dBA @ 10 feet) may cause hearing damage.
Do not operate unit without adequate hearing protection for you and anyone in immediate vicinity.
(Ref. OSHA 1910.95 for occupational noise exposure guidelines)