24
GB
CARSON FY5 Destroyerline Brushless 50 040 9040
Technical data motor:
Brushless
Motor
Sensorless
U/min
1500 UpV
U/min @ 14.8 V
22 200
Short term
Short term 80 A
Dimensions (A- Ø x L)
35.8 x 73 mm
Technical data ESC:
Brushless
Forward
yes
Reverse
yes
Input voltage
2 - 4 LiPo cells/6 - 12 NimH cells
g. Technical Data Motor and ESC
Red wire +
Black wire –
Black wire –
-
Black power
wire (battery
negative)
+
Red power wire
(battery
positive)
Red wire to the positive
of the ESC
Black wire to the negative
of the ESC
h. Connection/Cabling
Connect the ESC, motor, receiver, battery and
servo according to the following diagram.
Positive (+) and negative (-) wires of the ESC are connected with the
battery pack.
A, B and C are connected with the motor wires. The control cable of
the ESC (wires in black, red and white colour) is connected with the
throttle channel of the receiver (usually CH2).
The A, B, C wires of the ESC can be connected with the motor wires
freely (without any order). If the motor runs in the opposite direction,
please swap any two wire connections.
If there are 2 battery packs, which need to be
connected in series, please refer to the
following picture.
