Under the reset condition(the digital tube shows
RST),long press the up button for 5S，the
sensitivity can be adjusted.
switch display
“10.5”--10kg
“10.6”--15kg
“10.7”--20kg
Sensitivity setting on
retreating upon obstacle
Press M button，it shows“S-”，select and
press one of the memory buttons,current height
will be remembered.
Use up/down button to get the desirable height,
then repeat the following action.
Setting of memory position
1. If your desk has the following issues，please try resetting:
• Working abnormality
• Hand controller shows RES（
• Hand controller shows error（E07,E08 ），but motor drive wire
is well connected.
If it shows
（
），please cut off the power and allow
it to cool off for 20 minutes.
Normal problems and solutions
1
2
3
M
69.5
long press for 5S
1
2
3
M
69.5
Page 9 of 10
