Carson 500507066, Instruction Manual

Page: 37 / 40

37
Problem Cause Reparation
The model does not move Check whether the transmitter and the recei-
ver are switched on
Switch transmitter and/or receiver on
Check the battery voltage of transmitter and
receiver
Employ completely charged batteries
Motor does not turn
Motor is defective Exchange the motor
Motor is too hot Allow the motor to cool down
The model reacts incorrectly to the con-
trol commands or flies choppily
Check the state of the transmitter and recei-
ver battery charges
Employ completely charged batteries
The model does not take off Rotor blades are twisted Exchange the rotor blades
Motor is too hot Allow the motor to cool down
Batteries are empty Charge the batteries or exchange them
The rotors do not allow shut down Trim is not correctly adjusted Correct the trim on the pitch controller
The model moves forward/backward and
sidewise, but does not hover
Check whether the quadcopter is exposed to
a draught, e.g. by an opened window or an
air conditioner. Hover flight is not possible
when there is a draught
Close the window/door, switch off the air
conditioner or select a more suitable room
The model vibrates severely
Check whether the rotors run true Possibly change the rotor blades
Transmitter and quadcopter can not be
binded
Throttle control not set to minimum Throttle need to be minimized to zero
Gyro not working well Battery voltage is to low Fully charge battery
Re-binding Switch transmitter and model on and off
Unable to Flip Power not enough Fully charge battery
Can not take off
Wrong installation on rotors, rotors mark with
A, B
Mount the propeller as shown below
500507066_X4-Quadcopter-MAX_RZ.indd 37 21.05.14 12:08