Carson 500507049, Instruction Manual

Page: 20 / 40

GB
// 20
Connect the battery to the helicopter. Switch the helicopter on and
place it on a level surface.
2
ON/OFF
switch
Now push the throttle lever fully down and then switch on the
transmitter. (Status LED flashes)
1
ON/
OFF
GET THE HELICOPTER READY FOR TAKEOFF
Now we‘re good to go! But before liftoff, make sure that you have read this manual through completely.
Now move the throttle lever completely up and then back down.
Now the helicopter is ready to launch. (Status LED lights permanent)
3
LI-ION BATTERY CHARGING
The helicopter is fitted with a Li-Ion battery.
7.4 V Li-Ion battery.
Important !!!
Put the switch of the helicopter on the „OFF“
position before charging.
1. The supplied Li-Ion battery is stored in the body of the
helicopter.
2. Connect the charger to the socket.
3. Connect the battery pack to the charger.
(Status LED glows red)
4. The charging indicator light glows green once charging has
finished. This shows that the battery is ready to use.
Charge time: 2-3 hours