CarShow
Installation Guide
CarShow
Copyright 2012 All Rights Reserved
Installation Guide
CS-UN1170-12
Page 5
Turn the vehicle ON and confirm the
unit is fully operational
With the connectors
Fully Engaged
, turn the vehicle
on and press the
RESET
located behind SD card
access door.
Insert a DVD to confirm the Video
Disable Circuit is properly Operating.
In some vehicles the Brake Wire must be connected to
the Park Brake Indicator Wire to complete a ground
when the brake is engaged.
ENABLE INSTALLER SETTINGS
You will need to select certain Installer Setting based on any Optional Equipment that you may have
installed
STEP
4
Launch the Installer Setting Screen
From any screen with the Menu Button, follow these
steps to display the Installer Setting Screen:
1) From any Screen, select “Menu”
2) From the Menu Screen, select “Settings”
3) Press “Keypad,” Press “1120” and “Enter”
Select the individual Settings as needed
for the installed components
Selectable options vary by product and installation.
Select the options as applicable for the installed
optional components.
