CarShow Installation Guide - Toyota Tundra/Sequoia
CarShow
Copyright 2013 All Rights Reserved
Installation Guide
CS-TUND09-3
Page 7
Insert a DVD to confirm the Video
Disable Circuit is properly Operating.
The Brake Wire must be connected to the Park Brake
Indicator Wire to complete a ground when the brake is
engaged.
ENABLE INSTALLER SETTINGS
You will need to select certain Installer setting based on any Optional Equipment that you may have
installed
STEP
6
Launch the Installer Setting Screen
From any screen with the Menu Button, follow these
steps to display the Installer Setting Screen:
1)
From any Screen, select “Menu”
2)
From the Menu Screen, select “Settings”
3)
Press “Keypad,” Press “1120” and “Enter”
Select the individual Settings as needed
for the installed components
Selectable options vary by product and installation.
Select the options as applicable for the installed
optional components.
Perform Pre-Delivery Tests
You will need to perform several Pre-Delivery Tests to ensure customer satisfaction
Some equipment may be optional
STEP
7
Turn the vehicle ON and System ON
Confirm the unit starts up properly
Troubleshooting
1) Reset the System while the Vehicle is ON
2) Confirm all connectors are properly installed
3)
Check the Vehicle and System Fuses
