-9-
the interval time from 30 to 999, unit is second. The tracker will send back information “Set Interval yyy OK”, if
the password is not right, the operation is fault, the tracker will send back information “Wrong Password”. 30
seconds is the default interval time. Longer upload interval time can save battery and GPRS data cost, but this
will make the total mileage to more error.
Note: Only in the GSM work mode 1, this setting is available.
7. Set the LEDs ON or OFF
The tracker has two LEDs, green LED and red LED, which indicate different working situation. And the
LEDs can be set always OFF to save the battery power or to be easy hidden.
Send SMS “LEDOFF*123456” or “LEDON*123456” to tracker, “LEDOFF” or “LEDON” is a command,
“123456” is password. The tracker will send back information “Set LEDOFF OK” or “Set LEDON OK”, if the
password is not right, the operation is fault, the tracker will send back information “Wrong Password”. And then
the LEDs turn off immediately. And the LEDs can’t indicate the working situation, but when charge the tracker
with a adapter, the red LED will be on in all the charging process.
Note: Default the LEDs will be ON.
8. Check tracker setting
Send SMS “CHECK*123456” to tracker, “CHECK” is the fixed command, “123456” is password. The
tracker will send back information including software version, ID S/N number, IP address, authorized phone
number, GPS and GSM signal etc. if the password is not right, the operation is fault, the tracker will send back
information “Wrong Password”. The following is an example :
800,V Mar 03 2014
，
CC8001400820800
，
MODE 1
，
58.64.155.133,8011
，
30
，
A:13987654321
B:13876543210
，
GPS OK
，
GSM:-95dBm,CMNET,88%
800,
:Product Model
V Mar 03 2014
:Software version date
CC8001400820800
:ID S/N number
MODE 1
:GSM Working Mode
58.64.155.133,8011
:Server IP and Port
30
:Upload Interval Time
A:13987654321
:Authorized number (A/B/C)
GPS OK
:GPS status
GSM:-95dBm
:GSM signal strength
CMNET
:APN name
88%
:Battery
Note: This command usually be used to check the tracker current status & configuration, if the tracker
can not work well, this command can check what the problem is.
9. Re-power On & Reset Tracker
Send SMS “RESET*123456” to tracker, “RESET” is a command, “123456” is password. The tracker will
