(*
備註：本產品不含
iPad
電源供應器
)
1.
PWR LED (Green):
Indicates ComWi is Power On for WiFi mode.
2.
WiFi LED (Red):
Indicates the Wireless LAN is keeping in working stage.
3.
Reset (3Sec) button under the Hole:
First, please make sure you had powered on the Wi
Router and WiFi LED (Red) is keeping in working stage,
then you can
use a kit to press
the Reset button. After
pressing
3 seconds,
you will see
WiFi LED (Red) will
turn off.
Currently, you can
release the button
for
recovering it to
Default Network setting.
*Note: iPad Power Adapter is not included
主要功能介紹
/ Main Function
2.1
無線網路設定 /
Wireless Network Setup
如網路連線無須帳號密碼 /
If need no User Name/ Password
1.
將
iPad
電源供應器組入
W-Router
的凹槽中的
USB
插頭，通電後
並等待約
25
秒。
Connect the Ethernet cable to the WAN port of Travel Wi-Router
2.
連接網路線至產品底部的
RJ-45
網路接口。
Connect the other end of the Ethernet cable to the internet port at
hotel room (or ISP router)
