Moon Phase Display
The Moon Phase (A16) of each day is shown on the LCD.
A: New Moon B: Waxing Crescent C: First Quarter
D: Waxing Gibbous E: Full Moon F: Waning Gibbous
G: Last Quarter H: Waning Crescent
Low batteries indicator:
Low battery icon
“
“
appear at particular channel indicating that Thermal Sensor Unit of the
channel is in low battery status. The batteries should be replaced.
Note:
l
Use a pin to press the reset button(B12) if the Unit does not work properly.
l
Avoid placing the clock near interference sources/metal frames such as computer or TV sets.
l
The clock loses its time information when the battery is removed.
l
Buttons will not function while scanning for WWVB time signal or thermo sensor
’
s signal
unless they are well received or stopped manually.
l
All Setting Mode will automatically exit in 15 seconds without any adjustment.
FCC Disclaimer
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Warning:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user
’
s authority to operate the equipment.
The users manual or instruction manual for an unintentional or unintentional radiator
shall caution the user that changes or modifications not expressly approved by the party
responsible for compliance could void the user
’
s authority to operate the equipment.
Note:
This equipment has been tsted and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
