![background image](http://html.mh-extra.com/html/carrier/zc-series/zc-series_owners-manual_2560375014.webp)
1.
Never obstruct the air circulation of the unit installing
it behind curtains, furniture or partition walls.
4.
Install the air conditioner facing the largest
free area.
5.
Pay attention to the minimum distances between
the external surface of the unit and the wall near
it.
9.
In case of power outage, turn off the air conditioner
immediately, and turn it on again only 1 minute after
the power is re-established. This procedure will prevent
voltage variations that can cause damage to the
compressor.
10.
Do not use the circuit breaker as an On-Off switch.
The circuit breaker is the main safety device of the
electric circuit.
/ 40
7.
Avoid installing the outside surface of the air
conditioner turned to closed environments as roof
boards, garages, etc, the outside temperature might go
over the maximum operating temperature and damage
the unit.
8.
Whenever you want to change from Cooling to Heating,
or vice versa, turn off the appliance, and wait for 3
minutes before turning it on again.
6.
Comply with the minimum distance required for the
installation of more than one unit on a same wall.
14
The electronic models have an automatic
protective device that allows restarting
the compressor only 3 minutes after the
shutdown.
NOTE
8. WHERE AND HOW TO INSTALL
THE AIR CONDITIONER TO ACHIEVE
A BETTER PERFORMANCE
2.
Try to install the unit on a wall directed toward the
east, because the sunrays are less intense.
3.
Avoid using this unit in Cooling with inside temperatures
lower than 20ºC / 68°F, so that the ice does not accumulate
in the inside heat exchanger.
All manuals and user guides at all-guides.com