![background image](http://html.mh-extra.com/html/carrier/xpower-40kqm/xpower-40kqm_owners-manual_2560368010.webp)
40KQM
GB - 8
Use of the remote control
AM
Selecting the fan speed
(button E)
The fan speed can be selected by pressing button
.
Indicated symbol
Low speed
(for night operation)
Medium speed
High speed
(at start-up, to reach temperature)
Automatic (fan speed will automatically switch to the
value required for optimum comfort).
ON timer procedure
1.
ON TIMER button
(button I)
Press this button, even if the remote control
is OFF.
The relevant icon and time figure will
startto flash.
If 10 seconds have elapsed and no button
is pressed, the remote control turns OFF (if
it was already OFF when button
was
pressed) or timer function automatically
deactivates.
2.
HOUR/MINUTE buttons
(buttons
and
)
If the unit is ON, the only possible selection
is the start-up time. The unit will operate
with the selections shown on the display.
3.
HOUR/MINUTE buttons
(buttons
and
)
If the unit is OFF: to select the start-up
time, use the temperature control buttons
(buttons
and
).
First select the hours and, after have
confirmed these by pressing button
,
select the minutes using either button
or
.
To definitively set the time, press button
again.
4.
Operating mode
Choose the unit operating mode.
The icons will flash.
To select the mode, use the button
.
Once the mode has been decided, press
button
.
The icon of the selected mode will stop
flashing.
5.
Desired temperature
To select the desired temperature, (the
value is flashing, use either button
or
.
Push button
, to confirm the selection.
Numbers will stop flashing.
6.
Fan speed
Choose the fan speed, using button
.
When the selection has been completed,
press button
for confirmation.
The icon will stop flashing.
7.
Louvre positioning
Now this icon is flashing.
Use button
, to select desired position.
Press button
for confirmation.
Now all icons are fixed on display.
If you want to cancel selections up to here
inserted, push button ; if you want to
cancel all options once timer has been set,
push button
and then .
About the ON timer
• When the ON Timer function is operating,
the unit senses the room air temperature
1 hour before the start-up time.
• The unit start can be brought forward based
on the programmed start time, by 0 to 40
minutes, depending on the temperature
difference between the room and the
selected temperature.
OFF timer procedure
1.
OFF TIMER button
(button L)
Press button
.
The OFF timer icon and numbers for time
selection are flashing.
This function can be set even if the remote
control is OFF.
2.
HOUR/MINUTE selection buttons
(buttons
and
)
To set the clock time, press either button
or
.
To move from hour to minute, press
button
.
Press button
again to confirm.
Personalisation
and
(buttons G and F)
If you want memorize a personalised operating mode, recallable
at any time, proceed as follows:
1. With the remote control ON or OFF, press button
and hold it
pressed for more than 5 seconds.
On the display, the personalisation icon
will start flashing.
2. Press button
, to select the operating mode.
3. Press either button
or
to select the desired temperature.
4. Using button
select the fan speed.
5. Using button
select the louvre operation.
6. When all options have been entered, press button
to
memorise them.
At this point, all selected and memorised functions can be
activated through button
, whatever the unit operating mode.
Once the personalised mode has been entered, press one of the
buttons
,
,
,
or
to exit.
If you want to change one or more memorised parametres, begin
again from point 1.
AM
Summary of Contents for Xpower 40KQM
Page 66: ...40KQM GR 4 12 h B ...