Document revision history
UPC Open
Carrier Proprietary and Confidential
CARRIER CORPORATION ©2017
Installation and Integration Guide
All rights reserved
24
Important changes to this document are listed below. Minor changes such as typographical or formatting errors are not
listed.
Date
Topic
Change description
Code*
6/1/17
ZS Sensor overview
Wireless sensor overview
Changed driver to 6.04-xxx
C-TS-RD-E
5/19/17
Select or create a custom control
program and graphic for the UPC Open
Custom control programs and graphics for ZS sensors, wireless
sensors, or touchscreen, require the February 2017 or later
cumulative update.
C-TS-RD-E
Specifications
Wiring devices to the UPC Open's Rnet
port
The following note added:
The UPC Open only supports ZS sensors, Equipment Touch, and
wireless sensors using the 6.04.xxx or later driver.
C-TS-RD-E
4/7/17
Wireless sensor overview
To install the Wireless Adapter for
Wireless sensors
To wire an Equipment Touch to the UPC
Open
New topics
C-D
Wiring devices to the UPC Open's Rnet
port
Added Wireless Adapter for wireless sensors and Equipment
Touch
C-D
To wire the controller to the BACnet
network
Added BACnet ARC156 connection information
C-D
Wiring for communications
Changed from Wiring the UPC Open to the MS/TP network
C-D
Safety Considerations
Warning added to disconnect controller before wiring.
C-D
Specifications
Added ARC156, Equipment Touch, ZS, and Wireless Adapter for
Wireless sensor capability.
C-D
Cover
What is the UPC Open?
Changed to latest controller image.
C-D
All references to BACview removed
C-D
2/22/16
Local access to the UPC Open
Added USB Link wiring caution.
C-TS-RD-E-JH
1/12/16
What is the UPC Open?
Corrected Universal Protocol Card to Unitary Protocol Converter
C-TS-RD-E
UPC Open specifications
Changed Maximum number of BACnet objects to Unlimited from
1050
C-TS-RD-O
Restore factory defaults
Added information on using the Factory Defaults jumper
C-D-LJ-RD-E
* For internal use only
Document revision history
