4–9
T-378
4.7 Programming the ECM with New Software
If the ECM needs to be updated with new firmware, use the ECM Service tool to do it. Refer to
.
1. From the Setup screen, click on the Firmware tab.
2. Click on the “Update ECM with firmware” button. A window will prompt to locate the new software file.
3. Choose the new software file and click Open. A window will open showing progress of the download.
4. Once the update is complete the message “Update successful” is displayed. Click OK.
5. Confirm that the software / firmware revision has been updated.
Figure 4.12 ECM Service Tool - Software Update
