Carrier TruVu VVTBP-E2, Installation And Startup Manual

Page: 54 / 92

Adjusting the TV-VVTBP-E2 driver properties
TruVu™ VVTBP -E2 ©2022 Carrier.
Installation and Start-up Guide All rights reserved.
48
Common Alarms
On these pages, you can enable/disable, change BACnet alarm properties, or set delays for the following BACnet
alarms:
Common alarms:
•
Duplicate Address
•
Control Program
•
Controller Halted
•
Locked I/O
•
Program Stopped
•
Excessive COV
•
All Programs Stopped
Controller Generated Alarm
Description Short message shown on the i-Vu® Alarms page or in an alarm action when this
type of alarm is generated.
Events
Alarm Category and Alarm
Template See Setting up an alarm source in the i-Vu® interface in i-Vu® Help.
Enable Clear these checkboxes to disable Alarm or Return to normal messages of this
type from the TV-VVTBP-E2.
Notification Class In a typical i-Vu® system, the Notification Class is 1; however, if needed, you can
associate a different notification class with the alarm. See
Notification Classes
(page 46) to set up alarm delivery options for a specific Notification Class.
Specific Events
On these pages, you can enable/disable, change BACnet alarm properties, or set delays for the following BACnet
alarms:
Specific alarms:
•
Flow Control Alarm
•
Reheat Valve Alarm
NOTE To set up alarm actions for controller generated alarms, see Alarms in i-Vu® Help.
Controller Generated Alarm
Description Short message shown on the i-Vu® Alarms page or in an alarm action when this
type of alarm is generated.
Events
Alarm Category and Alarm
Template See Alarms in i-Vu® Help.
Enable Clear these checkboxes to disable Alarm or Return to normal messages of this
type from this controller.
Notification Class Do not change this field.