![background image](http://html1.mh-extra.com/html/carrier/truvu-et-eqt2-10/truvu-et-eqt2-10_installation-and-startup-manual_2563785013.webp)
Wiring
the TruVu™ ET display
TruVu™ ET Display (part no. EQT2)
©2022 Carrier.
Installation and Start-up Guide
All rights reserved.
9
CAUTION
If the equipment is used in a manner not specified by the manufacturer, the protection provided
by the equipment may be impaired.
Wiring for Communication - Ethernet port connection
To connect to the Ethernet service port of a controller, connect a patch cable from the Ethernet port on the
TruVu™ ET display to the Ethernet service port on the controlle
r.
NOTE
Your controller must have drv_fwex_104.00.2182 or later for Ethernet service port functionality to work.
Wiring for Communication - USB port connection
This function is supported by TruVu™ controllers only
. To connect to the USB service port of a controller, connect a
USB Type-
A cable from the USB port on the TruVu™ ET display interface to th
e USB port on the controller.
NOTE
You must have TruVu™ ET display driver version 107
-XX-XXXX or later for USB port functionality to work.