![background image](http://html1.mh-extra.com/html/carrier/truvu-eqt2/truvu-eqt2_installation-and-startup-manual_2563784009.webp)
Wiring the TruVu™ ET display
TruVu™ ET Display (part# EQT2)
CARRIER CORPORATION ©2020
Installation and Start-up Guide
All rights reserved
5
Wiring for power
Connect the TruVu™ ET display to either a:
•
24 VDC power supply using 2-conductor wire 18 AWG.
•
24 VAC power supply using a
NSA-A/PS24-24V-S
low voltage power supply
NOTE
Must be within 100 feet (30 meters).
WARNING
Do not apply line voltage (main).
CAUTION
The TruVu™ ET display can share a power supply with the Carrier controller as long as:
•
The power supply is DC power.
•
You maintain the same polarity.
•
You use the power source only for Carrier controllers.
NOTE
Purchase a power supply from a third-party manufacturer.
Wiring the TruVu™ ET display
Summary of Contents for TruVu EQT2
Page 4: ......
Page 47: ......
Page 48: ...CARRIER CORPORATION 2020 Catalog No 11 808 687 01 11 4 2020 ...