4
Model C300 NP
Safety
061128
Section 3
Safety
We at Taylor are concerned about the safety of the
operator when he or she comes in contact with the
freezer and its parts. Taylor has gone to extreme
efforts to design and manufacture built-in safety
features to protect both you and the service
technician. As an example, warning labels have
been attached to the freezer to further point out
safety precautions to the operator.
IMPORTANT - Failure to adhere to the
following safety precautions may result in
severe personal injury or death. Failure to
comply with these warnings may damage the
machine and its components. Component
damage will result in part replacement expense
and service repair expense
.
To Operate Safely:
DO NOT
operate the freezer without reading this
operator’s manual. Failure to follow this instruction
may result in equipment damage, poor freezer
performance, health hazards, or personal injury.
S
DO NOT
operate the freezer unless it is
properly grounded.
S
DO NOT
attempt any repairs unless the
main power supply to the freezer has been
disconnected.
S
DO NOT
operate the freezer with larger
fuses than specified on the freezer data
label.
Failure to follow these instructions may result in
electrocution. Contact your local authorized Taylor
Distributor for service.
DO NOT
use a water jet to clean or rinse
the freezer. Failure to follow this instruction may
result in serious electrical shock.
S
DO NOT
allow untrained personnel to
operate this machine.
S
DO NOT
operate the freezer unless all
service panels and access doors are
restrained with screws.
S
DO NOT
remove the freezer door or beater
assembly unless the control switches are in
the “OFF” position.
Failure to follow these instructions may result in
severe personal injury from hazardous moving parts.
CAUTION: This unit is pressurized when
in operation.
The control switch must be in the OFF
position until the unit is completely assembled. No
part should ever be removed from the machine while
it is in operation. No parts should be removed until
the control switch has been turned to the OFF
position. Failure to follow this instruction may result
in severe personal injury from hazardous moving
parts or from the impact of propelled parts.
S
DO NOT
put objects or fingers in door
spout.
S
USE EXTREME CAUTION
when removing
the beater assembly.
Failure to follow these instructions may result in
contaminated product or personal injury from blade
contact.
