Communications wiring
RTU Open v5
CARRIER CORPORATION ©2019
Integration Guide
All rights reserved
16
Refer to
Appendix A
(page 41) for the Network Points list.
Refer to
Appendix D
(page 58) for the Protocol Implementation Conformance Statement.
Software settings
defined through the Equipment Touch device. To confirm settings, obtain a Modstat of the
device. On the Equipment Touch, click the link to the Modstat.
LonWorks
WARNING
When you handle the LonWorks Option Card:
Do not contaminate the printed circuit board with fingerprints, moisture, or any foreign material.
Do not touch components or leads.
Handle the board by its edges.
Isolate from high voltage or electrostatic discharge.
Ensure that you are properly grounded.
Refer to
Appendix E
(page 60) for the LonWorks Protocol Implementation Conformance Statement (PICS).
