Auto
Sleep
Temp
Turbo
Cool
Heat
Timer
Fan
Fan
Speed
Dry
Sweep
POWER
+
_
Carrier
Carrier
1
9
2
3
4
5
11
12
8
10
6
7
POWER BUTTON
If you press this button, the unit will begin
operation. Press the button again, and
operation stops.
FAN SPEED BUTTON
Press the button to select the desired fan
speed of LOW, MED, or HIGH.
TEMPERATURE SETTING BUTTONS
If you set the desired room temperature, then
the unit will maintain the room temperature at
the set temperature.
TURBO BUTTON
Press the button to cool quickly the room at
selected temperature.
TIMER BUTTON
Timer can be set on or off. User can set any
time between 1 to 12 hours, by using the (+)
and (-) buttons.
SLEEP BUTTON
Press this button to set the SLEEP timer.
SWEEP BUTTON
Controls the discharge air flow direction left
and right automatically.
COOL BUTTON
In COOL mode, the unit will run at the normal
cooling mode.
HEAT BUTTON
In HEAT mode, the unit will run at the normal
heating mode.
FAN BUTTON
In FAN mode, only the fan will operate
AUTO BUTTON
In AUTO mode, the fan speed will be
controlled by the microcomputer of the unit.
DRY BUTTON
In DRY mode, fan speed goes to low from auto
and dehumidification takes place.
1
7
8
9
10
11
12
2
3
4
5
6
REMOTE HANDSET
( Cooling and Heating )
10
