STEP #4
TEST OPERATION
Page 9
Press the
MODE
button repeatedly until
the
HEAT
icon appears on the display.
Press the Up or Down buttons until the set
temperature is 10 degrees above room
temperature. The furnace should turn on.
Press the
MODE
button repeatedly until
the
COOL
icon appears on the display.
Press the Up or Down buttons until the set
temperature is 10 degrees below room
temperature. The air conditioner should
turn on.
NOTE:
Most equipment has a
time delay of 5 minutes between cool
cycles. This feature is defeatable on the
thermostat. Consult the Owner's Manual
under Setup, cycles per hour.
Turn the power on to the Heating/Air
Conditioning system.
Press the
MODE
button to
OFF
. Press
the
FAN
button to
Fan On
. The fan
should turn on and run continuously.
