All trademarks used herein are the property of their respective owners.
Indoor Air Quality (IAQ) Desktop Display
Proprietary and Confidential
© 2022 Carrier. All rights reserved.
Rev. 3/3/2022
A Carrier Company
2
To install the IAQ
Follow the steps below to install your IAQ.
1
Connect the power supply to the IAQ.
2
Configure your
WiFi connection
(page 3).
3
Follow the installation wizard on the IAQ for the first boot of the device.
○
You must select a 4 to 10 digit numerical PIN. Record this PIN, as it will be required to modify
the settings later.
○
The IAQ automatically locates and connects to your building automation system.
4
Calibrate your
CO2 sensor
(page 3).
You can now begin using your IAQ.
To configure the IAQ
Follow the instructions below to customize the settings on your IAQ.
To adjust the brightness
Brightness setting
1
Tap the
Settings
icon
.
2
Tap
Brightness
, and move the brightness slider to the desired position.
3
Tap the
Back
icon
when you are finished.
Automatic dimming setting
Automatic dimming causes the IAQ to dim when not in use, and brighten when your hand come close
to the screen.
1
Tap the
Settings
icon
.
2
Tap the
Automatic Dimming
toggle to turn automatic dimming on or off.
3
Tap the
Back
icon
when you are finished.
