Product
Data
HUM
Humidifiers
Copyright 1998 Carrier Corporation
Form HUM-1PD
All Carrier humidifiers are designed
for easy installation and quiet
operation with heat pumps as well as
upflow, downflow, or horizontal
furnaces. Humid air is circulated
throughout the home by the central
heating system. All Carrier humidifiers
are equipped with a humidistat to
maintain the desired humidity level.
Access to the media pad in the
humidifier is convenient and tools are
not required, allowing easy pad
replacement.
The fan-powered humidifiers, Model
HUMCCLFP and HUMCCSFP, are
designed for simple installation on
supply ductwork, without a bypass
duct required. Humidity is achieved by
drawing heated supply air through a
wet media pad, by means of the
humidifier’s fan. The HUMCCLFP
offers high evaporation rate, up to 25
gallons of moisture per day. For
smaller, tighter constructed, or well
insulated homes, the HUMCCSFP can
deliver up to 16 gallons of moisture per
day.
The bypass humidifiers, Model
HUMCCLBP and HUMCCSBP, are
designed for installation on the supply
or return ductwork, by means of a
bypass duct on a forced air heating
system. Bypass humidifiers operate on
the pressure differential between
supply and return ductwork, bypassing
heated supply air through the wet
media pad, and back into the return air.
The HUMCCLBP offers up to 18
gallons of moisture per day with front
bypass duct discharge. The
HUMCCSBP can deliver up to 17
gallons of moisture per day and has a
reversible side bypass duct discharge.
The humidifiers mentioned are
constructed of high-impact, Lexan
thermoplastic to provide years of
Model HUMCCLFP1025-A--
Model HUMCCLBP2018-A--
Model HUMCCWTR2019-A--
Model HUMCCSBP2017-A--
Model HUMCCSFP1016-A--
