March 2021
Page 67 of 143
59812-K007 Rev 17
Business Confidential
3.8
ALARM TEST
The Alarm Test allows an alarm condition to be simulated on the detector. The indications on the
detector, Control Unit and Remote Display Unit will be as per a slowdown/shutdown alarm however the
slowdown/shutdown alarm will not be activated, allowing the test to be performed without shutting
down the engine.
Press the Alarm Test button
Figure 96
Detector Alarm Test
Press the Test button
Figure 97
Detector Alarm Test Activated
The screen will revert to the engine overview screen showing the engine in alarm, it is not necessary to
press OK as shown on the above screen.
Figure 98
Engine Alarm User
To reset the alarm, press the engine button under the bar graph.