Carrier Foretrack 5m Antenna Replacement V1.3
4.
Route the cables back through the unit frame
secure as needed.
Route the cables into the DC 500 and c
Carrier Foretrack V100
5.
Check operation of the DataCOLD 500 including unit communication by
pressing the
RED
status button.
the display (If none present check all connections and Micro configurations
before proceeding further).
Page 2 of 2
through the unit frame of the unit to the DC 500 and
oute the cables into the DC 500 and connect the new antenna cables to the
Check operation of the DataCOLD 500 including unit communication by
status button. Check that there is a valid Setpoint shown in
present check all connections and Micro configurations
before proceeding further).
Note:
In the communication process the arrow
display, during this time the keypad will be temporarily locked.
23/04/2013
to the DC 500 and
antenna cables to the
Check operation of the DataCOLD 500 including unit communication by
Check that there is a valid Setpoint shown in
present check all connections and Micro configurations
communication process the arrow will appear on the
display, during this time the keypad will be temporarily locked.