Carrier CRF-30-CM, Installation & Owner'S Manual

Page: 15 / 30

Installation & Owner
‘
s Manual
12
3. Mode locking
1) Effect
Under mode locking state, through centralized controller to operate the air conditioner,
only can choose the mode which has not conflict with locking mode.
2) Operation
Can set the heating mode locking or cooling mode locking.
Under mode locking state, if set the new mode locking, it must be unlocking first, then can
operate the new mode locking.
①
Can lock or unlock through the computer.
②
Can operate by centralized controller.
In the centralized controller setting interface, choose all the air conditioners of the
centralized controller network as the object, press
“ ”
and hold on, then press
“ ”
to
do the mode locking or unlocking.
If the current state is mode locking, press the key to unlock.
If there
’
s no mode locking, press the key to lock.
4. Centralized controller key locking and unlocking
1) Effect
When centralized controller keys are locked, keys operation is invalid except
“ ”
key and
unlock keys.
2) Operation
1. Press
“ ”
key and hold on, then press
“ ”
key, the keys of centralized controller will
be locked or unlocked.
If the current state is key locking, press the key to unlock.
If no centralized controller key locking, press the key to lock.
2.When the backlight turns off, the keys will be locked automatically. Press any key to light
the backlight first. Secondly, press
“ ”
key and hold on, press
“ ”
key to unlock keys. Then
operation to the controller is enabled.
The backlight will turn off and the keys will be locked automatically if there
’
s no operation
within 30 seconds.
Use the
“ ”
key or
“ ”
key to do the ON and OFF operation for the air
conditioners in the centralized controller network.
The ON mode will accord to the system mode locking or other limit conditions
for judging, if there is conflict, it will auto adjust to the next mode without conflict; if
all the modes have conflict, then it can not operate the unit.
1.
Use
“ ”
key to ON and OFF the unit
Can operate a single air conditioner or all the air conditioners in the centralized controller
network.
1)
Choose the object. Press
“ ”
key to choose a single air conditioner or all the air
conditioners in the centralized controller network. If choose a single air conditioner,
then use
“ ”
,
“ ”
,
“ ”
, and
“ ”
to choose the air conditioner.
2)
Use
“ ”
,
“ ”
,
“ ”
, and
“ ”
to set the operating mode and operating parameters,
such as fan speed, setting temperature etc.
3)
Use
“ ”
key, centralized controller send the relative order to the operating object.
After setting the operating parameter for the air conditioner, if not press the
“ ”
key the
setting parameter will not be sent to the air conditioner, and the current operation of the air
conditioner is not affected (except locking operation).
2.3.5 ON and OFF operation