Carrier Comfort Touch-n-Go, Owner'S Manual

Page: 38 / 60

36
OPERATING THE THERMOSTAT
6. Install new batteries by matching the “plus” and “minus” ends of the batter-
ies with the “plus” and “minus” indicators you’ll see outside the two white
battery shapes in the space where the batteries sit.
7. Snap the batteries into place.
8. Put the thermostat back on the
wall bracket
by lining up the two
slots
on
the bottom edge of the back of the thermostat with the two
lips
on the
wall
bracket
. You will feel the
slots
fit over the
lips
.
9. With the bottom of the thermostat attached to the bottom of the
wall brack­
et
, bring the thermostat back to the wall. Line up the
latch
at the top of the
thermostat with the corresponding
lip
on the
wall bracket
.
10. Lightly push the thermostat toward the wall. When the
latch
and
lip
are
lined up properly, you will hear the thermostat snap into place.