![background image](http://html.mh-extra.com/html/carrier/comfort-touch-n-go-tc-pac/comfort-touch-n-go-tc-pac_owners-manual_2564057018.webp)
16
PROGRAMMING THE THERMOSTAT
Setting the home temperature
1. Open the door.
2. Press the
home
button located under the display on the
left. You will see a triangle icon (
B
) above the
home
but-
ton. This icon will always tell you whether you’re in the
home, away or sleep setting.
3. You will see the heating and cooling temperatures that
were set at the factory. To use these, just close the door.
4. To change the factory settings press the
home
button. You
will see the word heat flashing on the screen.
5. Press the
up
or
down
button until you reach the desired
temperature setting.
6. Press and hold the
home
button for about three seconds.
The set temperature will flash, indicating that it saved
your settings.
7. To change the cooling temperature setting, press the
mode
button repeatedly until you see the word cool flash-
ing on the screen.
8. Press the
up
or
down
button on the right side of the dis-
play until you reach the desired temperature setting.
9. Press and hold the
home
button for about three seconds. The set temperat-
ure will flash, indicating that it saved your settings.