4
2. Insert tube end into remaining portion of compatible
fitting.
3. Solder with low--temperature (430
F) silver alloy solder.
UNIT DAMAGE HAZARD
Failure to follow this caution may result in equipment
damage or improper operation.
Wrap a wet cloth around rear of fitting to prevent damaging
factory--made joints.
CAUTION
!
4. Evacuate evaporator coil and tubing at condensing unit
service valves reclaiming refrigerant.
5. Operate system for 10 minutes.
6. Adjust charge to required superheat.
Copyright 2017 CAC / BDP
S
7310 W. Morris St.
S
Indianapolis, IN 46231
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
Catalog No: IM--CNPF--03
Replaces: IM--CNPF--02
Edition Date: 07/17