![background image](http://html.mh-extra.com/html/carrier/aquasnap-plus-30awh004hb/aquasnap-plus-30awh004hb_installation-manual_2563391020.webp)
12 30AWH
Troubles of the inverter can be diagnosed by LED
indications on the cycle control P.C. board of the outdoor
unit. Utilize them for various checks.
Before a check, confirm each bit of the DIP switch is set to
OFF position.
System test
Inverter board alarm codes (only for 30AWH012_)
(Fig. 16)
LED indication and code checking
Board position
Fig. 16
Legend:
A Position 4 LED Inverter Diagnostics Board (only 30AWH012_ and 30AWH015_)
B Position LED GMC Diagnostics Board
C Installation terminal strip
LED indication
Cycle control P.C. board
Cause
LED indication
D800
D801
D802
D803
D800 O: Red
D801 O: Yellow
D802 O: Yellow
D803 O: Yellow
: Flashing
: Off
: On
Heat exchanger sensor (TE) error
Suction sensor (TS) error
Hot gas discharge sensor (TD) error
High-pressure protection error
Outdoor air temperature sensor error (TO)
Outdoor motorised fan error DC
Communication error between IPDU (Abnormal stop)
High-pressure release operation
Discharge temp. error: hot gas is too high
EEPROM error
Communication error between IPDU (No abnormal stop)
G-Tr short-circuit protection
Detect circuit error
Current sensor error
Comp. lock error
Comp. break down
English
Summary of Contents for AquaSnap Plus 30AWH004HB
