Carrier 69NT40-541-001, Operation And Service

Page: 100 / 156

T-316 7–12
Figure 7.9 Oil Pump and Bearing Head
1. Oil Pump & Bearing Head
2. Thrust Washer
3. Oil Pickup Tube 4. Oil Inlet Port
5. Oil Pump Inlet
- - - - -
NOTE
If the oil pump was not operating properly, the entire oil pump & bearing head assembly must be
replaced. Individual parts are not available. If the pump requires inspection or cleaning, disassemble
and reassemble by referring to
Figure 7.10 . Clean all parts and coat all moving parts with compressor
oil before proceeding with reassembly.
Figure 7.10 Low Profile Oil Pump
1. Capscrews
2. Cover
3. Reversing Assembly
4. Pinion
5. Gear
6. Drive 7. O-Ring
8. Oil Pump & Bearing
9. Set Screw
10. Relief Valve
11. Pin
12. Gasket
- - - - -
2
1
3
4
5
Set screw must be removed.
2
1
3
4
5
6
7
8
9
10
11
12